Back To Main
PRODUCTS
  • Mobile & Stationary Hydraulics
PRODUCTS

Where to Buy

FIND YOUR LOCAL CONTACT
Display Results
Make the appropriate selection(s) above, based on your geographic location, and click "Display Results"
Or contact us for more information
Products Brands Solutions Industries About Service Blog Careers News Events

Universal 3 Series - Positive Displacement Pumps

Product Type:
Pumps / Positive Displacement Pumps

Universal 3 Series positive displacement pumps are engineered to perform in food & beverage, dairy, pharmaceutical, personal care, chemical and industrial industries. 

The Universal 3 series includes a standard stainless steel gear case, the choice of multiple seal options, and bearings that are sealed from the product zone.

Many options are available for the Universal 3 series pump including an aseptic configuration with aseptic ports and cover.

Where To Buy
Features

Announcing the Universal 3 Series PD Pump has been named one of the winners in the Fluid Handling category of Plant Engineering Magazine 2018 Product of the Year! 

The Universal 3 Series is the latest addition to the Waukesha positive displacement pump family by SPX FLOW. It offers a front loading seal design with no bearings in the product zone. Operating pressure capacities up to 500 psi (34.5 bar) and standard 316L stainless steel body and cover makes this an attractive hygienic pump option for your most challenging applications in the food and beverage industry. Assembled and tested in Delavan, WI with "Waukesha 88" non-galling rotors and a standard 304 stainless steel gear case provides an ideal fluid transfer solution that is able to withstand the rigors of daily processing environments.

Long-life Features

  • Up to 500 psi (34.5 bar) pressure capability
  • Pumps rated to 300°F (149°C) as standard
  • Special rotor nut designed for extended service without loosening
  • No bearings in the product zone
  • New shafts are shorter and have larger diameter 17-4 PH shafts:
    • Reduces overhung load which improves shaft alignment and decreases seal and bearing wear for extended seal life.
    • Improves shaft strength and stiffness helping to eliminate vibration
  • Heavy duty stainless steel bearing frame standard
  • Double tapered roller bearings
  • Greased lubed bearings for positive lubrication to all bearings over entire speed, temperature and pressure range
  • Body retaining screws for maintaining mechanical seal contact during inspection
  • Extended outer seal life. A wave spring, instead of an O-ring, mechanically loads the seal
  • Unique mechanical seal design utilizes 2 pin stationary seal and special design shaft for rotary seal
  • Pumps for Life™ Lifecycle Program
    1. Buy a new U3 Pump
    2. Maintain with Genuine SPX FLOW Parts
    3. Trade in Old pump for New pump at a remanufactured price
Theory Of Operation

Time-tested Waukesha Cherry-Burrell rotary pump; circumferential-piston operating principle

In the Waukesha Cherry-Burrell design, arc-shaped "pistons” (rotor wings) travel in annular-shaped cylinders machined in the pump body; the resulting long sealing path reduces slippage and produces a smooth flow of product without destructive pulses or pressure peaks and without valves or complex parts.

 

 

 

 

 

FOR LOW VISCOSITY FLUIDS

Rotors, made of Waukesha “88” alloy, can be run with close clearance to the 316L stainless steel fluid head, without galling or seizing should inadvertent pressure surges cause contact. The close clearances combined with the rotor geometry, which gives a long sealing path between the pump inlet and outlet, means low slip operation. As a result, you achieve: high efficiency, good priming ability, metering capability and good flow control.

 

 

 

 

 

FOR HIGH VISCOSITY FLUIDS

The large fluid cavities of the rotors, plus the large, easy entry anti-cavitation ports, allow efficient pumping of high viscosity fluids, slurries or even liquids with large chunks or
particles.

 

 

 

 

FOR NON-LUBRICATING AND ABRASIVE FLUIDS

The Waukesha Cherry-Burrell design has no bearings in the fluid being pumped, no sliding or rolling contact and no rotor-to-rotor contact. This produces EXCELLENT SERVICE LIFE even under severe operating conditions.

Key Applications

Food and Beverage

  • Soups, Stews, Tomato Paste
  • Vegetables, Dressings
  • Chocolate, Fats & Oils Batters
  • Cream Fillings
  • Brewery, Wort
  • Soft/Fruit Drinks

 

 

Dairy

  • Cream, Milk
  • Cheese Curd & Whey
  • Cottage Cheese Yogurt

 

 

Pharmaceutical/Cosmetics

  • Pill Pastes
  • Hand Sanitizers
  • Syrups, Extracts, Slurries
  • Face Creams & Lotions
  • Hair Styling Gels & Liquids
  • Dyes & Alcohols

 

 

Chemical/Industrial

  • Solvents, Paints
  • Fuels
  • Resins, Polymers & Sludges
  • Oil & Lubricants
  • Soaps
Specifications

STANDARD U3 MODELS

MODEL

DISPLACEMENT
PER REVOLUTION

NOMINAL
CAPACITY
TO

 INLET/
OUTLET		 OPTIONAL
INLET/
OUTLET

PRESSURE RANGE
UP TO*

 MAXIMUM
RPM		 APPROX
SHIP
WT.		 TEMP RANGE
006-U3 .0082 GAL. (.031 LITER) 8 GPM (1.8 m3/hr.) 1.0 in 1.5 in 300 PSI (20.7 bar) 1000 56lb
(25kg)		 Std Clearance Rotors:
-40°F (-40°C) to
300° (149°C)
015-U3 .0142 GAL. (.054 LITER) 11 GPM (2.5 m3/hr.) 1.5 in --- 250 PSI (17.2 bar) 800 56lb
(25kg)
018-U3 .029 GAL. (.110 LITER) 20 GPM (4.5 m3/hr.) 1.5 in 2.0 in 200 PSI (13.8 bar) 700 65lb
(30kg)
030-U3 .060 GAL. (.227 LITER) 36 GPM (8.2 m3/hr.) 1.5 in 2.0 in 250 PSI (17.2 bar) 600 130lb
(59kg)
040-U3 .076 GAL. (.288 LITER) 46 GPM (10.4m3/hr.) 2.0 in --- 150 PSI (10.5 bar) 600 140lb
(64kg)
045-U3 .098 GAL. (.371 LITER) 58 GPM (13.2 m3/hr.) 2.0 in --- 450 PSI (31.0 bar) 600 295lb
(134kg)
060-U3 .153 GAL. (.579 LITER) 90 GPM (20.4 m3/hr.) 2.5 in 3.0 in 300 PSI (20.7 bar) 600 285lb
(129kg)
130-U3 .253 GAL. (.958 LITER) 150 GPM (34.1 m3/hr.) 3.0 in --- 200 PSI (13.8 bar) 600 305lb
(138kg)
180-U3 .380 GAL. (1.438 LITER) 230 GPM (52.2 m3/hr.) 3.0 in --- 450 PSI (31.0 bar) 600 520lb
(236kg)
210-U3 .502 GAL. (1.900 LITER) 300 GPM (68.1 m3/hr.) 4.0 in --- 500 PSI (34.5 bar) 600 915lb
(415kg)
220-U3 .521 GAL. (1.972 LITER) 310 GPM (70.4 m3/hr.) 4.0 in --- 300 PSI (20.7 bar) 600 590lb
(268kg)
320-U3 .752 GAL. (2.847 LITER) 450 GPM (102 m3/hr.) 6.0 in --- 300 PSI (20.7 bar) 600 895lb
(406kg)

 

 RECTANGULAR FLANGE U3 MODELS

MODEL

DISPLACEMENT
PER REVOLUTION

NOMINAL
CAPACITY
TO

 INLET/
W X L		 OUTLET

PRESSURE RANGE
UP TO*

 MAXIMUM
RPM		 APPROX
SHIP
WT.		 TEMP RANGE
014-U3 .0142 GAL. (.054 LITER) 5.68 GPM (1.3 m3/hr.) 1.44 x 4.94 1½" 250 PSI (17.2 bar) 400 62LB (28KG) Std Clearance Rotors:
-40°F (-40°C) to
300° (149°C)
034-U3 .060 GAL. (.227 LITER) 24 GPM (5.5 m3/hr.) 1.81 x 6.84 2" 250 PSI (17.2 bar) 400 116LB (53KG)
064-U3 .153 GAL. (.579 LITER) 61 GPM (13.9 m3/hr.) 2.44 x 9.0 2½" 300 PSI (20.7 bar) 400 292LB (132KG)
134-U3 .253 GAL. (.958 LITER) 101 GPM (22.9 m3/hr.) 3.19 x 9.38 3" 200 PSI (13.8 bar) 400 312LB (142KG)
184-U3 .380 GAL. (1.483 LITER) 152 GPM (34.5 m3/hr.)  3.28 x 11.25 3" 450 PSI (31.0 bar) 400 518LB (235KG)
214-U3 .502 GAL. (1.90 LITER) 200 GPM (45.4 m3/hr.) 3.45 x 12.70 4" 500 PSI (34.5 bar) 400 754LB (342KG)
224-U3 .521 GAL. (1.972 LITER) 208 GPM (47.2 m3/hr.) 4.06 x 11.25 4" 300 PSI (20.7 bar) 400 559LB (254KG)
324-U3 .752 GAL. (2.847 LITER) 300 GPM (68.1 m3/hr.) 4.25 x 12.70 6" 300 PSI (20.7 bar) 400 833LB (378KG)

* Contact application engineering for higher pressure or higher temperature applications.

Dimensions

MODEL 006-U3

0-1000 RPM speed range. 1" (25 mm) inlet/outlet and 1.5" (38 mm) optional inlet/outlet; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 


                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
12.42

7.61
10.04
4.21
1.00
0.88
 6.97
3.23
 2.79 0.40
MM
315
193
255
107
---
22
 177
82
 71 11

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.


Approximate shipping weight without motor or base 60 lb. (27 kg.)

MODEL 014-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 1.44" x 4.94" OUTLET: 1½"; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 12.5 0.5 1.63 0.5 6.5 NA 14.51 2.63 7.5 0.41 0.38 1.53 4.77 0.55 1.37 3.63 7.11
MM 318 13 41 13 165 NA 369 67 191 10 10 39 121 14 35 92 181

 

Approximate shipping weight without motor or base 62 lb. (28 kg.)

MODEL 015-U3

0-800 RPM speed range. 1.5" (38 mm) inlet/outlet; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
12.69

7.61
10.04
4.21
1.50
0.88
 6.97
3.23
 2.79 0.40
MM
322
193
255
107
---
22
 177
82
 71 11

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 62 lb. (28 kg.)

MODEL 018-U3

0-700 RPM speed range. 1.5" (38 mm) inlet/outlet; and 2.0" (64 mm) optional inlet/outlet; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
13.35

7.61
10.28
4.21
1.50
0.88
 7.09
3.47
 3.02 0.50
MM
339
193
261
107
---
22
 180
88
 77 11.1

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 65 lb. (29 kg.)

 

MODEL 030-U3

0-600 RPM speed range. 1.5" (38 mm) inlet/outlet; and 2.0" (64 mm) optional inlet/outlet; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
15.16

8.80
12.05
5.21
1.50
1.25
 8.50
4.26
 3.84 0.40
MM
385
224
306
132
---
32
 216
108
 98 10.2

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 114 lb. (52 kg.)

MODEL 034-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 1.81" x 6.84" OUTLET: 2"; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 12.75 0.56 1.88 0.63 10.75 NA 17.41 3 12 0.53 0.5 1.87 6.9 0.56 2.55 3.88 8.13
MM 324 14 48 16 273 NA 442 76 305 13 13 48 175 14 65 98 206

 

Approximate shipping weight without motor or base 116 lb. (53 kg.)

MODEL 040-U3

0-600 RPM speed range. 2.0" (51 mm) inlet/outlet; suitable to 150 PSI (10.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
15.54

8.80
12.21
5.21
2.00
1.25
 8.64
4.43
 4.00 0.40
MM
395
224
310
132
---
32
 219
113
 102 10.5

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 117 lb. (53 kg.)

MODEL 045-U3

0-600 RPM speed range. 2.0" (51 mm) inlet/outlet; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
19.11

11.00
14.84
7.31
2.00
1.63
 10.75
4.72
 4.73 SAME
MM
485
279
377
186
---
41
 273
120
 120 SAME

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 284 lb. (129 kg.)

MODEL 060-U3

0-600 RPM speed range. 2.5" (64 mm) inlet/outlet; and 3.0" (76 mm) optional inlet/outlet; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
19.66

11.00
15.13
7.31
2.50
1.63
 10.75
5.01
 5.01 SAME
MM
499
279
384
186
---
41
 273
127
 127 SAME

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 290 lb. (132 kg.)

MODEL 064-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 2.44" x 9.0" OUTLET: 2½"; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 13.94 0.5 4 0.52 12.2 NA 21.91 5 13.23 0.53 0.48 2.53 9.09 1.24 2.07 4.94 10.31
MM 354 13 102 13 310 NA 557 127 336 13 12 64 231 31 53 125 262

 

Approximate shipping weight without motor or base 292 lb. (132 kg.)

MODEL 130-U3

0-600 RPM speed range. 3.0" (76 mm) inlet/outlet; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
20.68

11.00
15.76
7.31
3.00
1.63
 10.75
5.64
 5.65 SAME
MM
525
279
400
186
---
41
 273
143
 144 SAME

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 310 lb. (141 kg.)

MODEL 134-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 3.19" x 9.38" OUTLET: 3"; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 13.94 0.78 3 0.63 14 NA 22.93 4.55 15.25 0.53 0.48 3.27 9.52 0.64 2.86 4.94 10.31
MM 354 20 76 16 356 NA 582 116 387 13 12 83 242 16 73 125 262

 

Approximate shipping weight without motor or base 312 lb. (142 kg.)

MODEL 180-U3

0-600 RPM speed range. 3.0" (76 mm) inlet/outlet; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
23.48

14.80
19.03
9.38
3.00
2.00
 13.06
4.21
 4.20 SAME
MM
596
376
483
238
---
51
 332
107
 107 SAME

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 498 lb. (226 kg.)

MODEL 184-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 3.28" x 11.25" OUTLET: 3"; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 20.75 0.63 5.75 0.63 16.75 8.38 26.48 7 18 0.53 0.61 3.36 11.33 1.82 3.34 7.25 13.78
MM 527 16 146 16 425 213 673 178 457 13 15 85 288 46 85 184 350

 

Approximate shipping weight without motor or base 518 lb. (235 kg.)

MODEL 210-U3

0-600 RPM speed range. 4.0" (102 mm) inlet/outlet; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
27.07

17.72
21.85
10.38
4.00
2.38
 14.73
5.64
 4.70 0.90
MM
688
450
555
264
---
60
 374
143
 119 24.3

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 510 lb. (231 kg.)

MODEL 214-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 3.45" x 12.70" OUTLET: 4"; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 35.94 0.75 7.5 0.75 16.5 8.25 29.06 9 18 0.69 1 3.55 12.8 2.73 2.6 8.81 17.46
MM 913 19 191 19 419 210 738 229 457 18 25 90 325 69 66 224 443

 

Approximate shipping weight without motor or base 754 lb. (342 kg.)

MODEL 220-U3

0-600 RPM speed range. 4.0" (102 mm) inlet/outlet; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
24.22

14.80
18.49
9.38
4.00
2.00
 13.25
4.45
 4.44 SAME
MM
615
376
470
238
---
51
 337
113
 113 SAME

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 748 lb. (339 kg.)

MODEL 224-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 4.06" x 11.25" OUTLET: 4"; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 23.75 0.63 4.38 0.63 16.75 NA 27.22 5.63 18 0.53 0.5 4.17 11.36 0.73 3.32 6.25 12.88
MM 603 16 111 16 425 NA 691 143 457 13 13 106 289 18 84 159 327

 

Approximate shipping weight without motor or base 559 lb. (254 kg.)

MODEL 320-U3

0-600 RPM speed range. 6.0" (152 mm) inlet/outlet; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

                R*
  CP I L O PORT SIZE U +.000-.001 2X U3 U1/U2 DIFF. BETWEEN U3 AND U1/U2
"R" DIM.
IN
27.66

17.72
22.34
10.38
6.00 150# FLG
2.38
 16.00
6.02
 5.09 0.90
MM
703
450
567
264
---
60
 406
153
 129 23.9

 

*"R" dimension shown for customers converting from a U1/U2 pump to a U3 pump. All other dimensions are the same between U1/U2/U3.

NOTE: Dimension "2X" applies for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320-U3)

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

 

Approximate shipping weight without motor or base 817 lb. (371 kg.)

 

 

MODEL 324-U3 RECTANGULAR FLANGE

0-400 RPM speed range. INLET: 4.25" x 12.70" OUTLET: 6"; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

  AO C CA CB CC CD CP1 FA FB HA M PA PB PC PD C 2X
IN 35.94 1.06 7.5 0.75 16.5 8.25 29.66 9.63 18 0.69 1 4.37 12.82 2.63 2.59 8.81 17.75
MM 913 27 191 19 419 210 753 244 457 18 25 111 326 67 66 224 451

 

Approximate shipping weight without motor or base 833 lb. (378 kg.)

Options

Ports

Standard:  Sanitary Clamp Type connections available in a variety of styles including S-Line, I-Line and Q-Line

  • Bevel Seat Available
  • Optional European Types; DIN, SMS, RJT
  • Male NPT and 150 lb. flanges optional on Models 006 through 220 size
  • 150 lb. flanges standard on Model 320
  • Optional aseptic ports

Rotors

Standard:  Twin Wing - Standard; suitable for most applications.

Rotor clearance

Standard:  up to 300°F (149°C)

  • Low viscosity clearance rotors optional for applications up to 200°F (93°C)
  • Contact application engineering for other rotor clearance options

O-Rings

Standard:  Fluoroelastomer FKM

Options:

  • PTFE/FFKM
  • Fluoroelastomer (FKM)
  • Fluoroelastomer (FKM) - Class 6
  • EPDM
  • EPDM - SF
  • EPDM - Class 6
  • Silicone
  • Perfluoroelastomer (FFKM)
  • FEP Encapsulates
  • Buna-N - Metal Detectable
  • FKM - Metal Detectable
  • EPDM - Metal Detectable

Seal Options

Standard:  Single Mechanical Seal Standard seal configuration: silicon carbide rotary seal face and carbon stationary seal face. Alternate materials available for abrasive service.

Options:

  • Double Concentric Mechanical Seal - Used with flushing fluid to cool, lubricate, flush away residue. Best arrangement for severe service.
  • Single and Double O-ring Seal - Waukesha Cherry-Burrell's traditional general purpose seal. Low cost and easy to service. Suitable for low pressure applications. 100 psi, 7 bar
  • Elastomer choices for o-rings:  Fluoroelastomer (FKM), EPDM, Perfluoroelastomer (FFKM)
  • Mechanical seal material options:  carbon, silicon carbide, tungsten carbide

Cover & Gearcase

Standard: Stainless steel 17-4 shafts, top shaft position, stainless steel bearing retainers, shaft completely sealed from product zone.

Options:

  • Lower shaft position
  • Bearing isolators
  • Pedestal shims for side mounted pumps. Left hand shaft position is standard
  • Right hand shaft is positioned on side mounted gearcase
  • Aseptic cover
  • Jacketed cover

Shaft Position

Standard:  Top shaft position

Options:

  • Lower shaft position

Mounting

Standard: Flat plate, epoxy painted, with adjustable feet, SS coupling guard, and Lovejoy or Woods coupling standard.

Options:

  • 304 SS unpolished plate base with adjustable feet
  • Portable base with rubber wheels
  • SS tubular bases

Bases & Drives

Standard: Stainless steel tubular base with adjustable feet and stainless steel guard and coupling standard

Options:

  • 304 SS plate.
  • Flat epoxy plate.
  • Portable base.

Tru-Fit®

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard.

Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for
    additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.
Performance

Click on the links below to download pump model performance curves for Universal 3 Series Positive Displacement pumps.

  • Universal 3 Series - Model 006 - Performance Curve - 95-07250 || PDF
  • Universal 3 Series - Model 015 - Performance Curve - 95-07251 || PDF
  • Universal 3 Series - Model 018 - Performance Curve - 95-07252 || PDF
  • Universal 3 Series - Model 030 - Performance Curve - 95-07253 || PDF
  • Universal 3 Series - Model 040 - Performance Curve - 95-07254 || PDF
  • Universal 3 Series - Model 045 - Performance Curve - 95-07261 || PDF
  • Universal 3 Series - Model 060 - Performance Curve - 95-07255 || PDF
  • Universal 3 Series - Model 130 - Performance Curve - 95-07256 || PDF
  • Universal 3 Series - Model 180 - Performance Curve - 95-07257 || PDF
  • Universal 3 Series - Model 210 - Performance Curve - 95-07259 || PDF
  • Universal 3 Series - Model 220 - Performance Curve - 95-07258 || PDF
  • Universal 3 Series - Model 320 - Performance Curve - 95-07260 || PDF
Videos
Universal 3 Series Animation
Universal 3 Series Maintenance Video - Single Mechanical Seals
Universal 3 Series Maintenance Video - Double Mechanical Seals
Universal 3 Series Maintenance Video - Single and Double O-Ring Seals
Universal 3 Series Animation - Chinese
Universal 3 Series Single Mechanical Seal Maintenance - Chinese
Pump Universal 3 Series Positive Displacement Animation
Pump Universal 3 Series Single Mechanical Seal Maintenance
Drawings & Models

Universal 3 Model 006 Standard Upper Drive STEP ‖ zip
Universal 3 Model 006 Lower Drive STEP ‖ zip
Universal 3 Model 006 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 006 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 006 U3_56C_1x1_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 006 U3_145TC_1x1_S-Line_2HP_LH_SM STEP ‖ stp

Universal 3 Model 014 U3_56C_(1.53 x 4.77)x1.5_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 014 U3_56C_(1.53 x 4.77)x1.5_S-Line_0.5HP_SIDE_SM STEP ‖ stp
Universal 3 Model 014 U3_145TC_(1.53 x 4.77)x1.5_S-Line_2HP_LH_SM STEP ‖ stp
Universal 3 Model 014 U3_145TC_(1.53 x 4.77)x1.5_S-Line_2HP_SIDE_SM STEP ‖ stp

Universal 3 Model 015 Standard Upper Drive STEP ‖ zip
Universal 3 Model 015 Lower Drive STEP ‖ zip
Universal 3 Model 015 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 015 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 015 U3_56C_1.5x1.5_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 015 U3_145TC_1.5x1.5_S-Line_2HP_LH_SM STEP ‖ stp

Universal 3 Model 018 Standard Upper Drive STEP ‖ zip
Universal 3 Model 018 Lower Drive STEP ‖ zip
Universal 3 Model 018 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 018 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 018 U3_56C_1.5x1.5_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 018 U3_145TC_1.5x1.5_S-Line_2HP_LH_SM STEP ‖ stp

Universal 3 Model 030 Standard Upper Drive STEP ‖ zip
Universal 3 Model 030 Lower Drive STEP ‖ zip
Universal 3 Model 030 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 030 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 030 U3_56C_1.5x1.5_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 030 U3_184TC_1.5x1.5_S-Line_5HP_LH_SM STEP ‖ stp

Universal 3 Model 034 U3_56C_(1.87 x 6.9)x2.0_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 034 U3_56C_(1.87 x 6.9)x2.0_S-Line_0.5HP_SIDE_SM STEP ‖ stp
Universal 3 Model 034 U3_184TC_(1.87 x 6.9)x2.0_S-Line_5HP_LH_SM STEP ‖ stp
Universal 3 Model 034 U3_184TC_(1.87 x 6.9)x2.0_S-Line_5HP_SIDE_SM STEP ‖ stp

Universal 3 Model 040 U3_56C_2.0x2.0_S-Line_0.5HP_LH_SM STEP ‖ stp
Universal 3 Model 040 U3_184TC_2.0x2.0_S-Line_5HP_LH_SM STEP ‖ stp

Universal 3 Model 045 Standard Upper Drive STEP ‖ zip
Universal 3 Model 045 Lower Drive STEP ‖ zip
Universal 3 Model 045 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 045 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 045 U3_145TC_2.5x2.5_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 045 U3_256TC_2.5x2.5_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 060 Standard Upper Drive STEP ‖ zip
Universal 3 Model 060 Lower Drive STEP ‖ zip
Universal 3 Model 060 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 060 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 060 U3_145TC_2.5x2.5_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 060 U3_256TC_2.5x2.5_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 064 U3_145TC_(2.53 x 9.09)x2.5_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 064 U3_145TC_(2.53 x 9.09)x2.5_S-Line_1.5HP_SIDE_SM STEP ‖ stp
Universal 3 Model 064 U3_256TC_(2.53 x 9.09)x2.5_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 064 U3_256TC_(2.53 x 9.09)x2.5_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Model 130 Standard Upper Drive STEP ‖ zip
Universal 3 Model 130 Standard Lower Drive STEP ‖ zip
Universal 3 Model 130 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 130 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 130 U3_145TC_3.0x3.0_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 130 U3_256TC_3.0x3.0_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 134 U3_145TC_(3.27 x 9.52)x3.0_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 134 U3_145TC_(3.27 x 9.52)x3.0_S-Line_1.5HP_SIDE_SM STEP ‖ stp
Universal 3 Model 134 U3_256TC_(3.27 x 9.52)x3.0_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 134 U3_256TC_(3.27 x 9.52)x3.0_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Model 180 Standard Upper Drive STEP ‖ zip
Universal 3 Model 180 Lower Drive STEP ‖ zip
Universal 3 Model 180 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 180 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 180 U3_145TC_3.0x3.0_S-Line_2HP_LH_SM STEP ‖ stp
Universal 3 Model 180 U3_256TC_3.0x3.0_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 184 U3_145TC_(3.36 x 11.33)x3.0_S-Line_2HP_LH_SM STEP ‖ stp
Universal 3 Model 184 U3_145TC_(3.36 x 11.33)x3.0_S-Line_2HP_SIDE_SM STEP ‖ stp
Universal 3 Model 184 U3_256TC_(3.36 x 11.33)x3.0_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 184 U3_256TC_(3.36 x 11.33)x3.0_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Model 210 Standard Upper Drive STEP ‖ zip
Universal 3 Model 210 Lower Drive STEP ‖ zip
Universal 3 Model 210 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 210 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 210 U3_215TC_4.0x4.0_S-Line_10HP_LH_SM STEP ‖ stp
Universal 3 Model 210 U3_256TC_4.0x4.0_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 214 U3_215TC_(3.55 x 12.8)x4.0_S-Line_10HP_LH_SM STEP ‖ stp
Universal 3 Model 214 U3_215TC_(3.55 x 12.8)x4.0_S-Line_10HP_SIDE_SM STEP ‖ stp
Universal 3 Model 214 U3_256TC_(3.55 x 12.8)x4.0_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 214 U3_256TC_(3.55 x 12.8)x4.0_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Model 220 Standard Upper Drive STEP ‖ zip
Universal 3 Model 220 Lower Drive STEP ‖ zip
Universal 3 Model 220 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 220 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 220 U3_145TC_4.0x4.0_S-Line_1.5HP_LH_SM STEP ‖ stp
Universal 3 Model 220 U3_256TC_4.0x4.0_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 224 U3_145TC_(4.17 x 11.36)x4.0_S-Line_2HP_LH_SM STEP ‖ stp
Universal 3 Model 224 U3_145TC_(4.17 x 11.36)x4.0_S-Line_2HP_SIDE_SM STEP ‖ stp
Universal 3 Model 224 U3_256TC_(4.17 x 11.36)x4.0_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 224 U3_256TC_(4.17 x 11.36)x4.0_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Model 320 Standard Upper Drive STEP ‖ zip
Universal 3 Model 320 Lower Drive STEP ‖ zip
Universal 3 Model 320 Side Mount Left Hand STEP ‖ zip
Universal 3 Model 320 Side Mount Right Hand STEP ‖ zip
Universal 3 Model 320 U3_213TC_6.0x6.0_S-Line_7.5HP_LH_SM STEP ‖ stp
Universal 3 Model 320 U3_256TC_6.0x6.0_S-Line_20HP_LH_SM STEP ‖ stp

Universal 3 Model 324 U3_213TC_(4.37 x 12.82)x6.0_S-Line_7.5HP_LH_SM STEP ‖ stp
Universal 3 Model 324 U3_213TC_(4.37 x 12.82)x6.0_S-Line_7.5HP_SIDE_SM STEP ‖ stp
Universal 3 Model 324 U3_256TC_(4.37 x 12.82)x6.0_S-Line_20HP_LH_SM STEP ‖ stp
Universal 3 Model 324 U3_256TC_(4.37 x 12.82)x6.0_S-Line_20HP_SIDE_SM STEP ‖ stp

Universal 3 Models 006 - 015 - 018 6.75inch Pedestal STEP ‖ zip
Universal 3 Models 030 - 040 6.25inch Pedestal STEP ‖ zip
Universal 3 Models 045 - 060 5.5inch Pedestal STEP ‖ zip
Universal 3 Models 180 - 220 13inch Pedestal STEP ‖ zip
Universal 3 Models 180 - 220 9inch Pedestal STEP ‖ zip
Universal 3 Models 180 - 220 22inch Pedestal STEP ‖ zip
Downloads
Brochures
FH-1802 Universal 3 Series ‖ US ‖ DE ‖ ES ‖ ES-LA ‖ FR ‖ IT ‖ JP ‖ NL ‖ NL-BE ‖ PT-BR
Pump Universal 3 Series Positive Displacement 1802 ‖ CN
Flyers
FH-1911 Pumps for Life™ Program for Universal 3 Series ‖ US
FH-1912 Preventive Maintenance Checklist for PD Pumps ‖ US
Manuals
95-03103 Universal 3 Series ‖ US ‖ CZ ‖ DE ‖ DK ‖ ES ‖ FI ‖ FR ‖ GR ‖ HU ‖ IT ‖ NL ‖ NO ‖ PL ‖ PT ‖ SE
Success Stories
PA1-21 - Pumping Sauces, Dressings, Dips - Pumps in Action ‖ US
PA2-21 - Pumping Cooked Ground Beef - Pumps in Action ‖ US
Resources
PL5064 - Universal 3 Pump Seal Kits Parts List ‖ US
PP-003 Universal 3 Series Seal Reference Chart ‖ US
SKP-001 - Universal 3 Models 006, 015, 018 Seal Kit Ordering Guide ‖ US
SKP-002 - Universal 3 Models 030, 034, 040 Seal Kit Ordering Guide ‖ US
SKP-003 - Universal 3 Models 045, 060, 130 Seal Kit Ordering Guide ‖ US
SKP-004 - Universal 3 Models 180, 220 Seal Kit Ordering Guide ‖ US
SKP-005 - Universal 3 Model 210 Seal Kit Ordering Guide ‖ US
SKP-006 - Universal 3 Model 320 Seal Kit Ordering Guide ‖ US
SKP-001 thru SKP-006 - Universal 3 All Models Seal Kit Ordering Guide ‖ US
Related

Capabilities

Pump Services