Back To Main
PRODUCTS
  • Mobile & Stationary Hydraulics
PRODUCTS

Where to Buy

FIND YOUR LOCAL CONTACT
Display Results
Make the appropriate selection(s) above, based on your geographic location, and click "Display Results"
Or contact us for more information
Products Brands Solutions Industries About Service Blog Careers News Events

Universal 2 Series - AP (Automotive Paint) - Positive Displacement Pumps

Product Type:
Pumps / Positive Displacement Pumps

This positive displacement pump is manufactured specifically for paint re-circulation in the automotive industry.

Where To Buy
Features

A modification of the Universal 2 positive displacement pump, this pump is manufactured specifically for paint re-circulation in the automotive industry.

Features:

  • 316 stainless steel pump body and cover.
  • Exclusive, non-galling Waukesha “88” alloy rotors standard; permits running at tighter clearances and pumping a wide range of viscosities.
  • Rotor/shaft connection sealed from product zone.
  • Mechanical seals standard. Single or flushed double.
  • Up to 500 psi (34.5 bar) pressure capability.
  • Rotor nut designed for extended service without loosening.
  • No bearings in product zone.
  • Larger diameter 17-4 PH shafts in seal area for greater strength and stiffness. Helps eliminate vibration; extends seal life.
  • Heavy duty bearing frame.
  • Double tapered roller bearings on all models. Contribute further to precise rotor position and longer seal life.
  • Silicone free grease lubed bearings for positive lubrication to all bearings over entire speed, temperature and pressure range.
  • Body retaining screws for maintaining mechanical seal contact during inspection.
  • O-ring on inner seal, seals on clean surface as seal moves due to wear.
  • Bearing isolators keep product out of gearcase and bearings.

Benefits:

  • Protects water-borne shear sensitive paints.
  • Pigments are not separated, which can change viscosity and cause color shifts.
  • Aluminum and mica metallic flakes are not damaged, which result in deep rich paint luster, and shiny finish.
  • Color matching between body and components is not a problem.
  • Substantial energy cost savings compared to turbine and piston pumps.
  • Constant flow regardless of system pressure changes, results in high film quality and thickness.
  • Pressure surges eliminated.
  • Minimal heat added to product.
  • Pumps are energy efficient, and easily cleaned, maintained, and repaired.

Pump Comparisons:

Requirements
Waukesha
Turbine
Piston
Eliminates surge suppression
YES
YES
NO
Constant flow regardless of system pressure changes
YES
YES
YES
Minimal heat input
YES
NO
YES
Variable speed drive options
YES
NO
YES
Energy efficient
YES
NO
NO
Easily repaired
YES
NO
NO
Easily maintained
YES
YES
NO
Prevent metallic flake degradation
YES
NO
YES
Theory Of Operation

Time-tested Waukesha Cherry-Burrell® rotary pump; circumferential-piston operating principle

In the Waukesha Cherry-Burrell design, arc-shaped "pistons” (rotor wings) travel in annular-shaped cylinders machined in the pump body; the resulting long sealing path reduces slippage and produces a smooth flow of product without destructive pulses or pressure peaks and without valves or complex parts.

 

 

FOR LOW VISCOSITY FLUIDS

Rotors, made of Waukesha “88” alloy, can be run with close clearance to the 316L stainless steel fluid head, without galling or seizing should inadvertent pressure surges cause contact. The close clearances combined with the rotor geometry, which gives a long sealing path between the pump inlet and outlet, means low slip operation. As a result, you achieve: high efficiency, good priming ability, metering capability and good flow control.

 

 

FOR HIGH VISCOSITY FLUIDS

The large fluid cavities of the rotors ... plus the large, easy entry anti-cavitation ports, allow efficient pumping of high viscosity fluids, slurries or even liquids with large chunks or
particles.

 

 

FOR NON-LUBRICATING AND ABRASIVE FLUIDS

The Waukesha Cherry-Burrell design has no bearings in the fluid being pumped, no sliding or rolling contact and no rotor-to-rotor contact. This produces EXCELLENT SERVICE LIFE even under severe operating conditions.

Key Applications

Paints

  • Water borne paints
  • Solvent borne paints
  • Clear coats
  • Metallic flake paints
  • Base coats
Specifications

MODEL

DISPLACEMENT
PER REVOLUTION

NOMINAL
CAPACITY
TO

 INLET/
OUTLET		 OPTIONAL
INLET/
OUTLET

PRESSURE RANGE
UP TO*

 MAXIMUM
RPM		 TEMP RANGE
AP-015-U2 0.0142 gal (0.054 L) 11 GPM (2.5 m³./h) 1.5 in
(38 mm)		 --- 250 psi (17.2 bar) 800 Std Clearance Rotors:
-40°F (-40°C) to
300° (149°C)
AP-018-U2 0.029 gal (0.110 L) 20 GPM (4.5 m³./h) 1.5 in
(38 mm)		 2.0 in
(51 mm)		 200 psi (13.8 bar) 700
AP-030-U2 0.060 gal (0.227 L) 36 GPM (8.2 m³./h) 1.5 in
(38 mm)		 2.0 in
(51 mm)		 250 psi (17.2 bar) 600
AP-040-U2 0.076 gal (0.228 L) 46 GPM (10.4 m³./h) 2.0 in
(51 mm)		 --- 150 psi (10.5 bar) 600
AP-045-U2 0.098 gal (0.371 L) 58 GPM (13.2 m³./h) 2.0 in
(51 mm)		 --- 450 psi (31.0 bar) 600
AP-060-U2 0.153 gal (0.579 L) 90 GPM (20.4 m³./h.) 2.5 in
(64 mm)		 3.0 in
(76 mm)		 300 psi (20.7 bar) 600
AP-130-U2 0.253 gal (0.958 L) 150 GPM (34.1 m³./h) 3.0 in
(76 mm)		 --- 200 psi (13.8 bar) 600
AP-180-U2 0.380 gal (1.438 L) 230 GPM (52.2 m³./h) 3.0 in
(76 mm)		 --- 450 psi (31.0 bar) 600
AP-210-U2 502 gal (01.900 L) 300 GPM (68.1 m³./h) 4.0 in
(102 mm)		 --- 500 psi (34.5 bar) 600
AP-220-U2 .0.521 gal (0.1.972 L) 310 GPM (70.4 m³./h) 4.0 in
(102 mm)		 --- 300 psi (20.7 bar) 600
AP-320-U2 0.752 gal (0.2.847 L) 450 GPM (102 m³./h) 4.0 in
(102 mm)		 --- 300 psi (20.7 bar) 600
Dimensions

Model AP 015-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 11.71 7.66 9.61 4.21 1-1/2" 0.875 6.97
MM 297 194 244 107 ----- 22.23 177

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 018-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 12.37 7.66 10.48 4.21 1-1/2" 0.875 6.97
MM 314 194 266 107 ----- 22.23 177

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 030-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 14.49 8.83 11.61 5.21 1-1/2" 1.25 8.5
MM 368 224 295 132 ----- 31.75 216

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 040-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 14.87 8.83 11.77 5.21 2" 1.25 8.62
MM 378 224 305 132 ------ 31.75 219

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 045-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 18.59 10.99 14.86 7.31 2" 1.625 10.75
MM 472 279 377 186 ----- 41.28 273

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 060-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 19.14 10.99 15.14 7.31 2-1/2" 1.625 10.75
MM 486 279 385 186 ----- 41.28 273

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 130-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 20.15 10.99 15.77 7.31 3" 1.625 10.75
MM 512 279 401 186 ----- 41.28 273

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 180-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 23.26 14.8 18.25 9.38 3" 2 13.06
MM 591 376 464 238 ------ 50.8 332

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 210-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 27.08 17.8 21.24 10.38 4" 2.375 14.73
MM 688 452 539 264 ------ 60.45 374

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 220-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 24 14.8 18.49 9.38 4" 2 13.25
MM 610 376 470 238 ----- 50.8 337

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Model AP 320-U2


               
  CP I L O PORT SIZE U +.000-.001 2X
IN 27.66 17.8 21.63 10.38 6 150# FLG 2.375 16
MM 703 452 549 264 ----- 60.45 406

 

NOTE: Dimension “2X” applies for “S”-Clamp on Models 015 through 220. D I N and other connections available. Dimension “2X” applies for 6” (152 mm) 150 lb. RF Flange on Model 320.

Options

Seals

  • Standard: Single Mechanical
  • Optional:  Double Concentric Mechanical Seal

Mechanical Seal Material

  • Standard:  Single Seal, Ceramic vs. Ceramic
  • Option:  Double Seal, Ceramic vs Ceramic inner, Ceramic vs Carbon outer

Coatings for Abrasive Applications

  • Armoloy® Coating
  • Composite Diamond Coating (CDC)

O-Rings

Standard:  Buna-N

Options:

  • PTFE/FFKM
  • Fluoroelastomer (FKM)
  • Fluoroelastomer (FKM) - Class 6
  • EPDM
  • EPDM - SF
  • EPDM - Class 6
  • Silicone
  • Perfluoroelastomer (FFKM)
  • FEP Encapsulates
  • Buna-N - Metal Detectable
  • FKM - Metal Detectable
  • EPDM - Metal Detectable

Cover & Gearcase

Standard: Steel-It paint gearcase, 17-4 stainless steel shafts, stainless steel bearing retainers

Options:

  • Stainless steel gearcase
  • 316L stainless steel shafts
  • Lower shaft position
  • Bearing Isolators
  • Pedestal shims for side mounted pumps. Left hand shaft position standard.
  • Right hand shaft position on side mounted gearcase

Tru-Fit®

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard.

Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for
    additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.
Performance

Click on the links below to download pump model performance curves for Universal 2 Series Positive Displacement pumps.

Download Instructions for Reading Positive Displacement Pump Curves || PDF
  • Universal 2 Series - Model 006 - Performance Curve - 95-07075 || PDF
  • Universal 2 Series - Model 015 - Performance Curve - 95-07076 || PDF
  • Universal 2 Series - Model 018 - Performance Curve - 95-07077 || PDF
  • Universal 2 Series - Model 030 - Performance Curve - 95-07078 || PDF
  • Universal 2 Series - Model 040 - Performance Curve - 95-07241 || PDF
  • Universal 2 Series - Model 045 - Performance Curve - 95-07106 || PDF
  • Universal 2 Series - Model 060 - Performance Curve - 95-07079 || PDF
  • Universal 2 Series - Model 130 - Performance Curve - 95-07080 || PDF
  • Universal 2 Series - Model 180 - Performance Curve - 95-07107 || PDF
  • Universal 2 Series - Model 210/213 - Performance Curve - 95-07156 || PDF
  • Universal 2 Series - Model 220 - Performance Curve - 95-07081 || PDF
  • Universal 2 Series - Model 320 - Performance Curve - 95-07132 || PDF
  • Universal 2 Series - Model 370 - Performance Curve - 95-07245 || PDF
Downloads
Brochures
Universal 2 Automotive Paint Pumps - FH-1737 ‖ US
Pump Remanufacturing Program - FH-1728 ‖ US
Manuals
Universal 2 Automotive PD Pump - 95-03056 ‖ US
Waukesha ISR - Integral Speed Reducer ‖ US
Flyers
FH-1912 Preventive Maintenance Checklist for PD Pumps ‖ US