Back To Main
PRODUCTS
  • Mobile & Stationary Hydraulics
PRODUCTS

Where to Buy

FIND YOUR LOCAL CONTACT
Display Results
Make the appropriate selection(s) above, based on your geographic location, and click "Display Results"
Or contact us for more information
Products Brands Solutions Industries About Service Blog Careers News Events

S200 Series - Stainless Steel Centrifugal Pumps

Product Type:
Pumps / Centrifugal Pumps

Designed for use in the Bio-Pharmaceutical industry, these pumps are manufactured to ASME BPE specification criteria.

Where To Buy
Features

 

All product contact components are machined from wrought less than 5% ferrite level, 316L SS and feature a 20 Ra product contact surface finish. Material heat numbers are available on all product contact components.

Standard Feature and Benefits

  • Designed to be Cleanable-in-Place (CIP)
  • High efficiency, low NPSHR design for a wide variety of applications.
  • One size mechanical seal for all S200 Series models; reducing parts inventory and cost (commercial seals available)
  • Integral impeller/shaft design for fewer parts, greater concentricity and easy maintenance
  • Close coupled pumps use NEMA JM Frame motors with larger diameter shafts and bearings (compared to C Frame motors)
  • Horizontal, vertical and 45° angle discharge port orientation available
  • Impellers, casing, and backplate are machined from wrought 316L SS
  • Stainless steel motor adapters
  • Reduced validation time
  • Documentation package
  • FDA approved fluroelastomers
  • USP Class VI elastomers
  • 3-A approved and EHEDG certified
Theory Of Operation

Low viscous fluids enter through the center inlet and flow around the impeller which turns at various speeds based on application requirements. The fluid then moves to the outer extents of the impeller vanes by centrifugal force and is directed through the outlet. As with other SPX FLOW centrifugal pumps, impeller and casing designs are optimized to perform more efficiently over a wide range of operating conditions. The casing and port are further designed to maximize performance under low NPSH conditions.

Key Applications

Typical product applications:

  • Pharmaceutical Processing
  • USP Purified Water
  • USP Water for Injection
  • Buffer Distribution & Transfer
  • Low Viscosity Product Transfer
  • CIP Solutions
Specifications

Model

Inlet
Size
in (mm)

Outlet Size
in (mm)

Max.
Impeller
Size
in (mm)

Max. Capacity GPM (M3/HR)

Max. Head Feet (Meters)

1750 RPM

3500 RPM

1750 RPM

3500 RPM

S2045

1½" (38mm)
2" (51mm)

1½"
(38mm)

4½"
(114 mm)

97 GPM
(22 m³/hr.)

190 GPM
(43 m³/hr.)

22 ft.
(7 m)

88 ft.
(27 m)

S2065

2½"
(64mm)

2"
(51mm)

6½"
(165 mm)

245 GPM
(56 m³/hr.)

400 GPM
(91 m³/hr.)

47 ft.
(14 m)

190 ft.
(58 m)

S2065LV

1½" (38mm)
thru
2½" (64mm)

1½"
(38mm)

6½"
(165 mm)

100 GPM
(23 m³/hr.)

200 GPM
(45 m³/hr.)

44 ft.
(13 m)

180 ft.
(55 m)

S2065HV

3"
(76mm)

2"
(51mm)

6½"
(165 mm)

370 GPM
(84 m³/hr.)

500 GPM
(114 m³/hr.)

50 ft.
(15 m)

200 ft.
(61 m)

S2075

3"
(76mm)

1½"
(38mm)

811/16"
(218 mm)

125 GPM
(28 m³/hr.)

300 GPM
(68 m³/hr.)

80 ft.
(24 m)

320 ft.
(98 m)

S2085

3" (76mm)
4" (102mm)

2½"
(64mm)

811/16"
(218 mm)

480 GPM
(109 m³/hr.)

840 GPM
(191 m³/hr.)

85 ft.
(26 m)

342 ft.
(104 m)

S2085LV

2"
(51mm)

1½"
(38mm)

8½"
(216 mm)

70 GPM
(16 m³/hr.)

145 GPM
(33 m³/hr.)

81 ft.
(25 m)

330 ft.
(101 m)

S2092

3"
(76mm)

2"
(51mm)

9¼"
(216 mm)

390 GPM
(88 m³/hr.)

700 GPM
(159 m³/hr.)

92 ft.
(28 m)

360 ft.
(109 m)
Dimensions

MODEL S2045

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.

Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
17.52 (445)
3.50 (89)
0.88 (22)
2.92 (74)
3.43 (87)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
18.90 (480)
4.50 (114)
0.88 (22)
2.92 (74)
3.43 (87)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
20.15 (512)
4.50 (114)
1.09 (28)
2.92 (74)
3.43 (87)
8.49 (216)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)
2045 1.5 (40) 1.5 (40) 3.88 (98) 1.81 (46) 2.25 (57)
2045 2.0 (50) 1.5 (40) 3.88 (98) 1.81 (46) 2.25 (57)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

1½" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07014 || PDF

2" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07013 || PDF

 

60 Hz - 3500 RPM Curves:

1½" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07015 || PDF

2" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07016 || PDF

 

50 Hz - 1450 RPM Curves:

1½" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07046 || PDF

2" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07045 || PDF

 

50 Hz - 2900 RPM Curves:

1½" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07025 || PDF

2" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07026 || PDF

MODEL S2065

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.

Unit Width Height
FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.43 (468)
3.50 (89)
0.88 (22)
2.71 (69)
4.53 (115)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
19.81 (503)
4.50 (114)
0.88 (22)
2.71 (69)
4.53 (115)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
21.01 (534)
4.50 (114)
1.09 (28)
2.71 (69)
4.53 (115)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
22.81 (579)
5.25 (133)
1.38 (35)
2.97 (75)
4.53 (115)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
23.94 (608)
5.25 (133)
1.38 (35)
2.97 (75)
4.53 (115)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
26.07 (662)
6.25 (159)
1.38 (35)
3.97 (101)
4.53 (115)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
27.83 (707)
6.25 (159)
1.38 (35)
3.97 (101)
4.53 (115)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.43 (798) 7.0 (178) 2.0 (63) 3.97 (101) 4.53 (115) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.64 (804) 7.0 (178) 2.0 (63) 3.97 (101) 4.53 (115) 14.44 (367)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)
S2065 2.5 (65) 2.0 (51) 4.94 (125) 2.68 (68) 2.88 (73)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

2½" x 2" x 6½" Model S2065 - 60 Hz Pump Curve, 95-07175 || PDF

 

60 Hz - 3500 RPM Curves:

2½" x 2" x 6½" Model S2065 - 60 Hz Pump Curve, 95-07177 || PDF

 

50 Hz - 1450 RPM Curves:

2½" x 2" x 6½" Model S2065 - 50 Hz Pump Curve, 95-07174 || PDF

 

50 Hz - 2900 RPM Curves:
2½" x 2" x 6½" Model S2065 - 50 Hz Pump Curve, 95-07176 || PDF

MODEL S2065HV

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.


Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.85 (479)
3.50 (89)
0.88 (22)
2.71 (69)
4.96 (126)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
20.23 (514)
4.50 (114)
0.88 (22)
2.71 (69)
4.96 (126)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
21.43 (544)
4.50 (114)
1.09 (28)
2.71 (69)
4.96 (126)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
23.23 (590)
5.25 (133)
1.38 (35)
2.97 (75)
4.96 (126)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
24.36 (618)
5.25 (133)
1.38 (35)
2.97 (75)
4.96 (126)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
26.49 (673)
6.25 (159)
1.38 (35)
3.97 (101)
4.96 (126)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
28.25 (718)
6.25 (159)
1.38 (35)
3.97 (101)
4.96 (126)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.85 (809) 7.0 (178) 2.0 (63) 3.97 (101) 4.96 (126) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 32.06 (814) 7.0 (178) 2.0 (63) 3.97 (101) 4.96 (126) 14.44 (367)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2065HV

3.0 (76)

2.0 (51)

4.94 (125)

3.04 (77)

2.88 (73)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07191 || PDF

 

60 Hz - 3500 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07193 || PDF

 

50 Hz - 1450 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07190 || PDF

 

50 Hz - 2900 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07192 || PDF

 

MODEL S2065LV

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.

Unit Width Height
FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
17.93 (455)
3.50 (89)
0.88 (22)
2.71 (69)
4.03 (102)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
19.31 (490)
4.50 (114)
0.88 (22)
2.71 (69)
4.03 (102)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
20.56 (522)
4.50 (114)
1.09 (28)
2.71 (69)
4.03 (102)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
22.31 (567)
5.25 (133)
1.38 (35)
2.97 (75)
4.03 (102)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
23.44 (595)
5.25 (133)
1.38 (35)
2.97 (75)
4.03 (102)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
25.57 (649)
6.25 (159)
1.38 (35)
3.97 (101)
4.03 (102)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
27.33 (694)
6.25 (159)
1.38 (35)
3.97 (101)
4.03 (102)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 30.93 (786) 7.0 (178) 2.0 (63) 3.97 (101) 4.03 (102) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.14 (791) 7.0 (178) 2.0 (63) 3.97 (101) 4.03 (102) 14.44 (367)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2065LV

1.5 (38)

1.5 (38)

4.94 (125)

2.43 (62)

3.13 (79)

S2065LV

2.0 (51)

1.5 (38)

4.94 (125)

2.43 (62)

3.13 (79)

S2065LV

2.5 (65)

1.5 (38)

4.94 (125)

2.43 (62)

3.13 (79)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

1½" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07163 || PDF
2" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07167 || PDF
2½" x 1½ " x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07171 || PDF

 

60 Hz - 3500 RPM Curves:

1½" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07165 || PDF
2" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07169 || PDF
2½" x 1½ " x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07173 || PDF

 

50 Hz - 1450 RPM Curves:

1½" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07162 || PDF
2" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07166 || PDF
2½" x 1½ " x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07170 || PDF

 

50 Hz - 2900 RPM Curves:

1½" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07164 || PDF
2" x 1½" x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07168 || PDF
2½" x 1½ " x 6½" Model S2065LV - 60 Hz Pump Curve, 95-07172 || PDF

MODEL S2075

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.


Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.17 (461)
3.50 (89)
0.88 (22)
2.75 (70)
4.24 (108)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
19.55 (497)
4.50 (114)
0.88 (22)
2.75 (70)
4.24 (108)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
20.80 (528)
4.50 (114)
1.09 (28)
2.75 (70)
4.24 (108)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
22.39 (569)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
23.52 (597)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
25.65 (651)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
27.41 (696)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.01 (788) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.22 (793) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
324JM 23.05 (585) 14.61 (371) 33.11 (841) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)
326JM 23.05 (585) 14.61 (371) 33.11 (841) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2075

3.0 (76)

1.5 (40)

6.69 (170)

2.70 (69)

4.32 (110)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07195 || PDF

 

60 Hz - 3500 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07197 || PDF

 

50 Hz - 1450 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07194 || PDF

 

50 Hz - 2900 RPM Curves:

3" x 2 " x 6½" Model S2065HV - 60 Hz Pump Curve, 95-07196 || PDF

MODEL S2085

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.

Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.84 (478)
3.50 (89)
0.88 (22)
2.75 (70)
4.24 (108)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
21.21 (513)
4.50 (114)
0.88 (22)
2.75 (70)
4.24 (108)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
21.46 (545)
4.50 (114)
1.09 (28)
2.75 (70)
4.24 (108)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
23.06 (586)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
24.19 (614)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
26.32 (668)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
28.08 (713)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.68 (805) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.89 (810) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
324JM 23.05 (585) 14.61 (371) 33.78 (858) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)
326JM 23.05 (585) 14.61 (371) 33.78 (858) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2085

3.0 (76)

2.5 (64)

5.75 (146)

2.93 (74)

3.82 (97)

S2085

4.0 (102)

2.5 (64)

5.75 (146)

2.93 (74)

3.82 (97)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

3" x 2½ " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07183 || PDF

4" x 2½ " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07187 || PDF

 

60 Hz - 3500 RPM Curves:

3" x 2½ " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07185 || PDF

4" x 2½ " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07189 || PDF

 

50 Hz - 1450 RPM Curves:

3" x 2½ " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07182 || PDF

4" x 2½ " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07186 || PDF

 

50 Hz - 2900 RPM Curves:

3" x 2½ " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07184 || PDF

4" x 2½ " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07188 || PDF

MODEL S2085LV

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.


Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.17 (461)
3.50 (89)
0.88 (22)
2.75 (70)
4.24 (108)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
19.55 (497)
4.50 (114)
0.88 (22)
2.75 (70)
4.24 (108)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
20.80 (528)
4.50 (114)
1.09 (28)
2.75 (70)
4.24 (108)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
22.39 (569)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
23.52 (597)
5.25 (133)
1.38 (35)
2.84 (72)
4.24 (108)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
25.65 (651)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
27.41 (696)
6.25 (159)
1.38 (35)
3.84 (98)
4.24 (108)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.01 (788) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.22 (793) 7.0 (178) 2.0 (63) 3.84 (98) 4.24 (108) 14.44 (367)
324JM 23.05 (585) 14.61 (371) 33.11 (841) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)
326JM 23.05 (585) 14.61 (371) 33.11 (841) 8.0 (203) 2.5 (63) 3.84 (98) 4.24 (108) 16.25 (413)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2085LV

2.0 (51)

1.5 (40)

6.69 (170)

2.70 (69)

4.32 (110)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

2" x 1½ " x 8.7" Model S2085LV - 60 Hz Pump Curve, 95-07179 || PDF

 

60 Hz - 3500 RPM Curves:

2" x 1½ " x 8.7" Model S2085LV - 60 Hz Pump Curve, 95-07181 || PDF

 

50 Hz - 1450 RPM Curves:

2" x 1½ " x 8.7" Model S2085LV - 60 Hz Pump Curve, 95-07178 || PDF

 

50 Hz - 2900 RPM Curves:

2" x 1½ " x 8.7" Model S2085LV - 60 Hz Pump Curve, 95-07180 || PDF

MODEL S2092

NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.


Unit Width Height

FRAME **A
in (mm)		 **AB
in (mm)		 **CP
in (mm)		 D
in (mm)		 ***F
in (mm)		 LP
in (mm)		 MP
in (mm)		 **O
in (mm)
145JM
9.32 (237)
5.73 (145)
18.78 (477)
3.50 (89)
0.88 (22)
2.75 (70)
4.85 (123)
7.10 (180)
182JM
9.32 (237)
5.73 (145)
20.16 (512)
4.50 (114)
0.88 (22)
2.75 (70)
4.85 (123)
8.10 (206)
184JM
11.11 (282)
6.87 (174)
21.41 (544)
4.50 (114)
1.09 (28)
2.75 (70)
4.85 (123)
8.49 (216)
213JM
13.18 (335)
8.04 (204)
23.00 (584)
5.25 (133)
1.38 (35)
2.84 (72)
4.85 (123)
10.39 (264)
215JM
13.18 (335)
8.04 (204)
24.13 (613)
5.25 (133)
1.38 (35)
2.84 (72)
4.85 (123)
10.39 (264)
254JM
15.34 (390)
9.40 (239)
26.26 (667)
6.25 (159)
1.38 (35)
3.84 (98)
4.85 (123)
11.39 (289)
256JM
15.34 (390)
9.40 (239)
28.02 (712)
6.25 (159)
1.38 (35)
3.84 (98)
4.85 (123)
11.39 (289)
284JM 20.78 (528) 13.12 (333) 31.62 (803) 7.0 (178) 2.0 (63) 3.84 (98) 4.85 (123) 14.44 (367)
286JM 20.49 (520) 13.12 (333) 31.83 (808) 7.0 (178) 2.0 (63) 3.84 (98) 4.85 (123) 14.44 (367)

**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.

Fluid Head

MODEL INLET
in (mm)		 OUTLET
in (mm)		 X
in (mm)		 Y
in (mm)		 Z
in (mm)

S2092

3.0 (76)

2.0 (51)

6.64 (169)

3.09 (78)

4.62 (117)

Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

60 Hz - 1750 RPM Curves:

3" x 2 " x 9.25" Model S2092 - 60 Hz Pump Curve, 95-07199 || PDF

 

60 Hz - 3500 RPM Curves:

3" x 2 " x 9.25" Model S2092 - 60 Hz Pump Curve, 95-07201 || PDF

 

50 Hz - 1450 RPM Curves:

3" x 2 " x 9.25" Model S2092 - 50 Hz Pump Curve, 95-07198 || PDF

 

50 Hz - 2900 RPM Curves:

3" x 2 " x 9.25" Model S2092 - 50 Hz Pump Curve, 95-07200 || PDF
Options

Product Options:

  • 15 or 20 Ra., electropolish and passivation product contact surface finishes
  • Double mechanical seals
  • Casing drain
  • SS motors
  • USP Class VI elastomers
  • Stainless steel motors
  • SS Leg Kits
  • Ra Mapping
  • Certified and witness performance testing
  • Pedestal mounted pumps
  • Stainless steel bases and coupling guards

 

Casing Drain Options

Front Facing - Models S2065 - S2092

0 DEGREE 90 DEGREE 45 DEGREE LIQUID RING

 

Bottom Facing - Models S2045 - S2092
0 DEGREE 90 DEGREE 45 DEGREE

 

Tangential - Models S2045 - S2092


0 DEGREE LEFT FACING

 90 DEGREE LEFT FACING 45 DEGREE LEFT FACING LIQUID RING LEFT FACING
0 DEGREE RIGHT FACING 90 DEGREE RIGHT FACING 45 DEGREE RIGHT FACING LIQUID RING RIGHT FACING

 

Front Facing with 90 Degree Elbow - Models S2045 - S2092
0 DEGREE 90 DEGREE 45 DEGREE
Performance

Centrifugal Pump Curve Instructions || US

Model S2045

S200 Series - Model S2045 - 1½" x 1½" x 4½" - 1450 RPM - 50 Hz - 95-07046 || PDF
S200 Series - Model S2045 - 2" x 1½" x 4½" - 1450 RPM - 50 Hz - 95-07045 || PDF
S200 Series - Model S2045 - 1½" x 1½" x 4½" - 1750 RPM - 60 Hz - 95-07014 || PDF
S200 Series - Model S2045 - 2" x 1½" x 4½" - 1750 RPM - 60 Hz - 95-07013 || PDF
S200 Series - Model S2045 - 1½" x 1½" x 4½" - 2900 RPM - 50 Hz - 95-07025 || PDF
S200 Series - Model S2045 - 2" x 1½" x 4½" - 2900 RPM - 50 Hz - 95-07026 || PDF
S200 Series - Model S2045 - 1½" x 1½" x 4½" - 3500 RPM - 60 Hz - 95-07015 || PDF
S200 Series - Model S2045 - 2" x 1½" x 4½" - 3500 RPM - 60 Hz - 95-07016 || PDF

Model S2065

S200 Series - Model S2065 - 2½" x 2" x 6½" - 1450 RPM - 50 Hz - 95-07174 || PDF
S200 Series - Model S2065 - 2½" x 2" x 6½" - 1750 RPM - 60 Hz - 95-07175 || PDF
S200 Series - Model S2065 - 2½" x 2" x 6½" - 2900 RPM - 50 Hz - 95-07176 || PDF
S200 Series - Model S2065 - 2½" x 2" x 6½" - 3500 RPM - 60 Hz - 95-07177 || PDF

Model S2065HV

S200 Series - Model S2065HV - 3" x 2 " x 6½" - 1450 RPM - 50 Hz - 95-07190 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6½" - 1750 RPM - 60 Hz - 95-07191 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6½" - 2900 RPM - 50 Hz - 95-07192 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6½" - 3500 RPM - 60 Hz - 95-07193 || PDF

Model S2065LV

S200 Series - Model S2065LV - 1½" x 1½" x 6½" - 1450 RPM - 50 Hz - 95-07162 || PDF
S200 Series - Model S2065LV - 2" x 1½" x 6½" - 1450 RPM - 50 Hz - 95-07166 || PDF
S200 Series - Model S2065LV - 2½" x 1½ " x 6½" - 1450 RPM - 50 Hz - 95-07170 || PDF
S200 Series - Model S2065LV - 1½" x 1½" x 6½" - 1750 RPM - 60 Hz - 95-07169 || PDF
S200 Series - Model S2065LV - 2" x 1½" x 6½" - 1750 RPM - 60 Hz - 95-07167 || PDF
S200 Series - Model S2065LV - 2½" x 1½ " x 6½" - 1750 RPM - 60 Hz - 95-07171 || PDF
S200 Series - Model S2065LV - 1½" x 1½" x 6½" - 2900 RPM - 50 Hz - 95-07164 || PDF
S200 Series - Model S2065LV - 2" x 1½" x 6½" - 2900 RPM - 50 Hz - 95-07168 || PDF
S200 Series - Model S2065LV - 2½" x 1½ " x 6½" - 2900 RPM - 50 Hz - 95-07172 || PDF
S200 Series - Model S2065LV - 1½" x 1½" x 6½" - 3500 RPM - 60 Hz - 95-07165 || PDF
S200 Series - Model S2065LV - 2" x 1½" x 6½" - 3500 RPM - 60 Hz - 95-07169 || PDF
S200 Series - Model S2065LV - 2½" x 1½ " x 6½" - 3500 RPM - 60 Hz - 95-07173 || PDF

Model S2075

S200 Series - Model S2075 -3" x 1½ " x 8.7" - 1450 RPM - 50 Hz - 95-07194 || PDF
S200 Series - Model S2075 - 3" x 1½ " x 8.7" - 1750 RPM - 60 Hz - 95-07195 || PDF
S200 Series - Model S2075 - 3" x 1½ " x 8.7" - 2900 RPM - 50 Hz - 95-07196 || PDF
S200 Series - Model S2075 - 3" x 1½ " x 8.7" - 3500 RPM - 60 Hz - 95-07197 || PDF

Model S2085

200 Series - Model S2085 - 3" x 2½ " x 8.7" - 1450 RPM - 50 Hz - 95-07182 || PDF
S200 Series - Model S2085 -4" x 2½ " x 8.5" - 1450 RPM - 50 Hz - 95-07186 || PDF
S200 Series - Model S2085 - 3" x 2½ " x 8.7" - 1750 RPM - 60 Hz - 95-07183 || PDF
S200 Series - Model S2085 - 4" x 2½ " x 8.5" - 1750 RPM - 60 Hz - 95-07187 || PDF
S200 Series - Model S2085 - 3" x 2½ " x 8.7" - 2900 RPM - 50 Hz - 95-07184 || PDF
S200 Series - Model S2085 - 4" x 2½ " x 8.5" - 2900 RPM - 50 Hz - 95-07188 || PDF
S200 Series - Model S2085 - 3" x 2½ " x 8.7" - 3500 RPM - 60 Hz - 95-07185 || PDF
S200 Series - Model S2085 - 4" x 2½ " x 8.5" - 3500 RPM - 60 Hz - 95-07189 || PDF

Model S2085LV

S200 Series - Model S2065HV - 3" x 2 " x 6½" - 3500 RPM - 60 Hz - 95-07178 || PDF
S200 Series - Model S2085LV - 2" x 1½ " x 8.7" - 1750 RPM - 60 Hz - 95-07179 || PDF
S200 Series - Model S2085LV - 2" x 1½ " x 8.7" - 2900 RPM - 50 Hz - 95-07180 || PDF
S200 Series - Model S2085LV - 2" x 1½ " x 8.7" - 3500 RPM - 60 Hz - 95-07181 || PDF

Model S2092

S200 Series - Model S2092 - 3" x 2 " x 9.25" - 1450 RPM - 50 Hz - 95-07198 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 1750 RPM - 60 Hz - 95-07199 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 2900 RPM - 50 Hz - 95-07200 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 3500 RPM - 60 Hz - 95-07201 || PDF

SPX FLOW offers an on-line centrifugal pump selector tool, PUMP-FLO Connect. 
Please log-in or create your account and correctly size an APV centrifugal pump.

 

Drawings & Models

143JM 1.5x1.5 S-Line 1HP ‖ stp
184JM 1.5x1.5 S-Line 5HP ‖ stp

143JM 2.5x2 S-Line 1HP ‖ stp
286JM 2.5x2 S-Line 30HP ‖ stp

143JM 3x2-S Line 1HP ‖ stp
286JM 3x2 S-Line 30HP ‖ stp

143JM 1.5x1.5 S-Line 1HP ‖ stp
286JM 1.5x1.5 S-Line 30HP ‖ stp

143JM 3x1.5 S-Line 1HP ‖ stp
326JM 3x1.5 S-Line 50HP ‖ stp

143JM 3x2.5 S-Line 1HP ‖ stp
326JM 3x2.5 S-Line 50HP ‖ stp

143JM 2x1.5 S-Line 1HP ‖ stp
326JM 2x1.5 S-Line 50HP ‖ stp

143JM 3x2 S-Line 1HP ‖ stp
326JM 3x2 S-Line 50HP ‖ stp
Downloads
Brochures
S200 Series - Designed for the Bio-Pharmaceutical Industry ‖ US
Datasheets
DS-1301 Sanitary Centrifugal Pump S200 Series ‖ US
Flyers
FB-0003 S200 Series Centrifugal Pumps Product Highlights ‖ US
Manuals
95-03080 Sanitary Centrifugal Pump S200 Series ‖ US
95-03047 - Centrifugal Pump Cart Assembly ‖ US
Related

Articles & Resources

MTR/Certification Package look-up

Products

200 Series - Aseptic - Centrifugal Pumps
200 Series - Sanitary - Centrifugal Pumps
200 Series - High Pressure - Centrifugal Pumps
200 Series - Water for Injection (WFI) Series - Centrifugal Pumps
200LR Series - Self-Priming Liquid Ring Centrifugal Pump
Multistage 200 Series - Centrifugal Pumps
200 Series - Heavy Duty Metric - Centrifugal Pumps